http://soundgaragedoor.com/wp-content/uploads/2017/03/924-2-1024x544.jpg
900 Series
http://soundgaragedoor.com/wp-content/uploads/2017/03/924-1024x544.jpg
900 Series
http://soundgaragedoor.com/wp-content/uploads/2017/03/After-900-Series-Commercial-Steel-1024x780.jpg
900 Series
http://soundgaragedoor.com/wp-content/uploads/2017/03/924-1024x544-1.jpg
900 Series
http://soundgaragedoor.com/wp-content/uploads/2017/03/924-with-800-Series-Full-Views-1024x768.jpg
900 Series
http://soundgaragedoor.com/wp-content/uploads/2017/03/924-with-800-Full-View-Section-1024x768.jpg
900 Series
http://soundgaragedoor.com/wp-content/uploads/2017/03/924-Brown-1024x544.jpg
900 Series

The 900 Series Industrial steel garage doors are strong and are designed for applications such as warehouse buildings and other commercial or industrial buildings. Deep ribs are rolled formed into the door giving the door construction added strength. Doors are available both 24 and 20 gauge galvanized steel that are protected with a white polyester finish. Insulation and back skin options are available as well as windows and several glass options.

General Information

  • Steel Thickness: 24 GA (Model 924) or 20 GA (Model 920), G 40 galvanized and painted
  • Overall Thickness: 2″
  • Section Heights: 21″ and 24″
  • Section Joint: Shiplap joint between sections
  • End Stiles & Center Stiles: 18 GA galvanized, End Stiles are galvanized and painted
  • Bottom weather seal: U-shape loop type vinyl with adjustable aluminum retainer
  • Finish: 4 Coat Process, Galvanizing, bonderizing, baked on epoxy, and polyester top coat
STANDARD WIDTHS: 8′-2″ 9′-2″ 10′-2″ 12′-2″ 14′-2″ 16′-2″ 18′-2″ 20′-2″ 22′-2″ 24′-2″
Bays Horizontally 2 2 3 3 4 4 5 5 6 6
STANDARD HEIGHTS: 8′-1″ 9′-1″ 10′-1″ 12′-1″ 14′-1″ 16′-1″
Sections Vertically 4 5 5 6 7 8

Hardware

15″ radius torsion hardware; track is 2″ hemmed and bracket mounted. 3″ track supplied when required by weight. Heavy duty steel rollers, non corrosive door fixtures and 14 gauge graduated hinges are standard. Double end hinges and long stem rollers are included on doors 16′-2″ wide or as required by weight. U-shaped galvanized struts are supplied on doors over 14′-2″ wide or as required by weight to keep the door rigid. All doors are standard with interior slide bolt lock.

Recommended Options

Insulate

25,000, 50,000 or 100,000 Cycle Torsion Springs

LiftMaster H-50 or T-50 Commercial Opener

Other Options

  • Insulate and Back
    • Polystyrene, Steel Back Cover (R 8.1)
    • Polyurethane, Steel Back Cover (R 11.5)
    • Polystyrene, High Impact Polystyrene Sheeting Back Cover (R 8.5)
    • Polyurethane, High Impact Polystyrene Sheeting Back Cover (R 11.9)
  • 20 Gauge Steel (Model 920)
  • Single Pane and Insulated Glass Options
  • 25,000, 50,000 and 100,000 Cycle Torsion Springs
  • Lift Options
    • Low Clearance
    • High Lift
    • Vertical Lift
  • Angle Mounted Track
  • 3” Track/Rollers
  • Double End Hinges and Long Stem Rollers (when not standard)
  • Chain Hoist, Reduced Drive
  • LiftMaster Electric Openers
  • Powder Coated Hardware

Glass

* The actual color may slightly vary from what you are seeing, depending on the color calibration of your computer monitor.

Before

After

Before & After